Green Laser Marking Machine
SGG-II Series, it's low energy consumption and easy maintenance. Thanks to the large energy of 532nm laser, the selectivity of marking materials is much better than others.
Tel.: +86-21-6034 3841 (UTC+08:00, 9:00~17:00) / +86 136 0179 0660 (24*7 Hours)
E-mail: info@ambermont.com Fax: +86-21-6766 9623 (UTC+08:00, 9:00~17:00)
- Product Introduction
- Technical Parameters
- Samples Display
Product Introduction
Compared with traditional laser marking machine, it's low energy consumption and easy maintenance. Thanks to the large energy of 532nm laser, the selectivity of marking materials is much better than others.
● Marking accuracy under 10μm, neat in marking edge and no thermal deformation;
● Heating affect can be ignored, it can be used for ultra precision marking & special materials marking;
● High electro-optic conversion efficiency, long life, low energy consumption, easy maintenance, cost saving;
● Advanced hardware control technology and intelligent software, easy operation, stable performance, batch processing efficiently and economically;
● Marking accuracy under 10μm, neat in marking edge and no thermal deformation;
● Heating affect can be ignored, it can be used for ultra precision marking & special materials marking;
● High electro-optic conversion efficiency, long life, low energy consumption, easy maintenance, cost saving;
● Advanced hardware control technology and intelligent software, easy operation, stable performance, batch processing efficiently and economically;
It's widely used in electrical appliances, communications, precision instruments, electronic components, electrical industry, integrated circuits, hardware tools products, auto parts, plastic products, crafts ornaments, etc.
Technical Parameters
| Models No. | SGG-II/07/10/20 | |||
|---|---|---|---|---|
| Optical Properties |
Rated Output Power |
7W |
10W |
20W |
| Laser Operating Mode | Nd:YVO4 green laser | |||
| Wavelength | 532nm | |||
| Repetition Frequency Range | 20~200kHz | |||
| Mode Quality (M2) | TEM00 (M2≤1.2) | |||
| Output Beam Diameter | ≤7mm | |||
| Pulse Width |
<15Ns@50kHz |
|||
| Beam Directivity | <25μrad | |||
| Beam Stability | ≤3%rms | |||
| Beam Divergence | ≤2mrad | |||
| Polarization | >100:1 horizonal linear | |||
| Cooling System | Internal air cooling or Water cooling | |||
| Scanner Properties | Max. Marking Speed |
≤15000mm/s |
||
| Repeatability | ±0.001mm | |||
| Min. Line Width | 0.03mm | |||
| Min. Character |
0.15mm |
|||
| Max. Marking Depth |
0.8mm |
1.0mm |
||
| Marking Characteristics | Pilot Laser | Red laser/650nm/5mW | ||
| Focal Distance | 160mm±2mm (standard&optional) | |||
| Marking Area |
110*110mm (standard&optional) |
|||
| System Properties |
Rated Power |
0.4kW |
0.8kW |
|
|
Power Supply |
AC 220V/50~60Hz |
|||
| Working Environment | 0~35°C, Humidity ≤90% | |||
Samples Display
